[extrashaky]

Originally Posted by mweidner311

Nice job! That looks exactly like a custom pro-fit bracket. We used to install them back in my college days working at Circuit city roadshop. I like it made me look them up

http://www.pro-fit-intl.com/Adobe/SC-51-05-L.pdf

think this bracket would work for us if you dont want to custom build one. Ill be picking one up myself.

http://www.pro-fit-intl.com/scion.htm

Unless I'm looking at the wrong page, that bracket for the tC doesn't look like it will work on the twins, at least not without drilling holes. I just used 18 gauge aluminum from Home Depot and a $9 metal seamer from Harbor Freight to make the bends. It mounts to the existing bolt that holds the stereo in and doesn't alter the car itself at all.

Originally Posted by 1Cor10:23

Have you guys checked out the iMagnet? I use it in the little triangular window at the front of driver side.

I had an old Samsung Note I was no longer using, and I also had the car mount for it, so I rooted it and made it my engine monitor. I'm using that same piece of triangular glass you're using. It makes me a little nervous there, because it's right in the way of the A-pillar airbag and could become a projectile in a crash, but the location is almost perfect otherwise.



By the way, I noticed that you had your cable hanging in the front of the dash. I have the cable for mine dressed behind the dash so that it comes out of the gap behind that little panel between the dash and the door. That panel comes off easily and gives you access to the area behind the gauge cluster, and putting it there allowed me to be able to open and close my door without removing the cable. The OFT cable looks too big to run there without some cutting, but a small notch out of that panel should give you plenty of clearance to dress that cable out of your way.

Eventually I'm planning to run my cable into the door and out the little hole at the top of the door panel so that it's dressed and hidden all the way up to the mount.