Quote:
Originally Posted by Diggitydog89
No like they will say. Oh the hole was prolly made because this PSI was ran or it was running lean or this or that. Cant make any assumption without the logs.
|
You know what you are right... In this forum we NEVER ask to review logs to figure out what happened...
Quote:
Originally Posted by jamesm
The log I saw was running ~13.5-14:1 at 2-2.2 bar absolute map, pulling 4-5 degrees of timing (throughout an entire 3rd gear pull) and still running 18 degrees. It was asking for like 24 degrees of timing in the map. On pump gas. At 2.0bar+ map (16psi+ relative).
|