Quote:
Originally Posted by jamesm
that sounds like you either took off before the exhaust cam turned on (unlikely), or that your fueling calibration is wrong and is requiring a trim in open loop to lean it back out. if that's the case, just make sure that everything is scaled properly and trims are minimal (i.e. <2%), and turn them off in open loop.
by ensuring that there are no trims operating in open loop and initial IAM is set to 1.. you should be able to flash the car, wait 30 seconds or so max for the exhaust cam to turn on, and go do power pulls. the throttle learning may need to take place but that won't effect a WOT pull.
|
Will give that a shot. If all goes well then I'll be much happier with the oft