Quote:
Originally Posted by JDLAutoDesign
Put in on as per the sequence below with all the connections loose and snap a pic. You may need to also have the over pipe loose to get it aligned
1 Hang it on the bracket and start the mounting bolt
2 Start the bolts in the front of the FP
3 Start the bolts in the rear FP
 |
I've tried every which way to hang this thing. The problem is the BRACKET IS TOO SMALL.
Thank you for posting that picture it shows exactly the problem! You changed the size of the bracket design. Case in point - look how much smaller my bracket is then what is shown in your own photo:
