Quote:
Originally Posted by switchlanez
Unless others start confirming they've had no slippage at the 114 ft-lb factory torque spec (the other guy is at 130 ft-lbs) in a slotted hole, you can say it's a 100% failure rate (1/1).
|
That wouldn't really be 100% if you only counted yourself against other crashbolt users. If you only counted yourself, it would def be 100%..but that would be a moot statistic.
You mean 1(as in yourself with this problem)/x-users, no?
x = the rest of the frs/brz users using oem crash bolts on slotted/oversized holes. ie: if there were 500 using the oem crash bolts and 1 reported slippage problem so far, it would actually be 1/500 = 0.2% failure rate.. or, until more people claim they are having the same problem.