Thread: OFT vs. Ecutek
View Single Post
Old 01-26-2014, 02:53 PM   #101
nelsmar
Senior Member
 
Join Date: Feb 2013
Drives: FR-S
Location: Phoenix
Posts: 2,605
Thanks: 733
Thanked 2,361 Times in 1,031 Posts
Mentioned: 345 Post(s)
Tagged: 3 Thread(s)
Quote:
Originally Posted by jamesm View Post
The scaling doesn't matter in terms of when it's maxed. 5v is 5v regardless of how much air the ecu thinks that correlates to. If you were hitting 4.8v at those boost/power levels, it has to be stock or smaller or maybe that particular car's sensor was an oddball. I ran 14psi and moved a lot more air before I saw that voltage.

The fact that targets were hit with the scaling near stock would suggest its around the same size as stock, but that's assuming the other fueling related calibrations are dead on true.
This was on a stock fuel system and I tested E85 and 91. AFR targets were pretty spot on. No matter what it is further than I am comfortable with. Unless you are bone stock I would recommend as SD tune on that setup.
__________________
When I grow up, I wanna be God.
My flickr - Canibeat
Local magazine scout
Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi
My build thread - WTF happened to nelsmar's car thread
nelsmar is offline   Reply With Quote
The Following User Says Thank You to nelsmar For This Useful Post:
jamesm (01-26-2014)