[Simply_the_best]

Originally Posted by Figo

I did that in another shop at the end.

It was a bleeder swap on Sti Brembo, AZP might did that before so that's why I prefer. (One of them in the shop has a BRZ with silver Sti front brembo).

The hex bolts are hard to be taken off. I tried it by myself and almost strip the thread. They need to be heated by torch and are easy to be messed up.

Good news is that the other shop did it perfectly. They heated the screws well, took or extracted the screws out and keep the thread clean and nice.

nice