Quote:
Originally Posted by Brianbajnauth
I have installed everything (viper 5704) and it work perfect
Just a few questions. The door locks- it works for about 10 mins and then stops working. I don't have a bypass module for the door locks. Maybe I tapped into wrong wire? Where is it located and wire color? Thanks so much for the help so far
|
Power Lock = blue wire located on the driver side kick panel, white 22 pin plug, pin 16
Power Unlock = pink wire located on the driver kick panel, white 22 pin plug, pin 15
I could not get my door locks to work for my setup without the second bypass module. The FRS has its door lock circuitry controlled by the car’s computer data bus. In order for the remote start Fob to integrate with and control the door locks (which may be necessary in order for the remote car starter to interface with the vehicle’s security system) a Door lock bypass module is needed.
If you remote start first the fob will work. After the car shuts off the car’s computer data bus will time out after 10 or 15 min and you fob won't work anymore. My fob did the same thing until I got the bypass.