Quote:
Originally Posted by Suberman
Since suspension geometry on your BRZ is fixed for practical purposes...
|
not true..
the recently released whiteline correction kit composed of a ball-joint and tie-rod end is pretty neat
as is the standard correction that can be done by the combination of camber plates at the top and bolts at the up-right
elongated control arms for the front aren't out of this world either...
on my old 2001RS I installed control arms (front and rear) from an 04 STi, they pushed the wheels out, giving me a lot of negative camber, I then adjusted at the up-right by dialing in what would otherwise have been positive camber... and balanced it out
track was increased, strut to control arm angle was decreased, camber was around -2? all for 150 bucks.
I've always wondered whether any of the suspension components from STis could be transferred.....