Quote:
Originally Posted by Deep Six
Great build and thanks for sharing! Could you share some details on the installation of the hood latches?
|
@
Evasive Motorsports did the installation so I would direct any specific questions to them. But I chose the Plus Flush Aerocatch hood pins for my car. These are top mounted and therefore the cut into the hood doesn't need to be as precise since the cut is covered by the latch frame (vs. the Aerocatch Flush hood pins which mount from underneath and are flush with the top of the hood surface). You can mount them in a number of positions (basically anywhere you have a metal brace/frame under the hood) but I would keep the set up symmetrical and a little further up front so you eliminate as much hood lift as possible. Hope that helps!