8.5 +34 will poke slightly up front w/o negative camber from alignment or drop.
If you have seen 8.5" +44, your +34 is 10mm out from that.
Quote:
Originally Posted by encity5
Hey guys, im a noob with wheel fitment and have been reading up past few days.
Im hoping to settle on my first wheel purchase which i am looking at miros type 398s
I wanted a square setup. the wheel size is
18x8.5 +34
and were thinking about tire sizes at
235 40 18
i am not lowered and on stock suspension. I might lower after i buy wheels with a 1inch drop.
Is there anything else i need or am forgetting about? Im not too worried about making it flush, just want the new wheels to fill out the gaps a bit better and not poke.
Thanks!
Im still looking but i havent seen any setups with 8.5 width and a 34 offset, most setups ive been seeing are between 40-45mm offset, which has prompted me to ask. The fitmet chart also lists 44 front and 37 back offset for flushness. So im wondering if +34 is too much of a difference
|