Quote:
Originally Posted by thill
So if I get this straight if you are above 5200rpm and do a fairly aggressive up-shift (say from 1st to 2nd) and step on the gas, you could cause the injectors to fail?
|
No. You're going to cause a detonation that could put excessive wear on the seals, and over time it causes a failure as the seals are taking a lot of heating up abuse.
Quote:
Originally Posted by Sigh-on-Rice
I believe it's "no". Post #5 on this thread explains it. At the bottom of page 1 of the pictured document.
I believe it means this only happens on 3-4, 4-5, and 5-6 shifts. Not 1-2 or 2-3 shifts.
|
It should still happen on any shift in any gear since the load is based on RPMs and not gears.