Quote:
Originally Posted by MrGreywolf
OK. I downloaded the file again and extracted it to the sd card.
With the card in the head unit I pushed and held the menu and volume buttons.
As before I got the blank white screen.
I continued to hold the 2 buttons down for another minute but no change
I released the buttons and left the unit on but so far still just the blank white screen.
I don't even get to see the update messages that I saw before so I have no idea if it is even trying to update. I guess I will leave it running for an hour or two just in case.
How long should the update take if it is working?
|
The update takes a few minutes but as I recall there's messages saying it is doing things.
Assume you are starting with the unit off and then holding menu and pressing power button at the same time to turn it on?
Have you extracted the files from the RAR file or just copied the RAR file to the SD card - if you have you need to extract the files from the RAR file and put those on the SD card. If you have then maybe extract the files to your computer first and then copy them to the SD card. Perhaps try another SD card as well.
Don't take offense at the above. I am just trying to work out what you may have done wrong. I was new to all this and made some dumb mistales - like starting with the unit on before pressing menu and power and wondering why it wouldn't work, pushing a micro SD card into the slot that wasn;t the SD card one and it disappearing into the unit, not realising you needed a bluetooth dongle... Was all new to me!