Quote:
Originally Posted by Pacific
My T7019A was shipped at HK on monday and received/delivered wednesday afternoon in France.
To minimize customs it was declared "monitor" with a value of 80$.
DHL, as usual, applied what they call VAT a lumpsum without any detail or explication and without any reference to customs regulation an amount of 29€. Taking into consideration the total amount involved it was not necessary to contest this amount.
The package is perfect and the connections complete for the Toyota harness.Just prepare the wiring for the reverse camera and the brake contact.
I'm just waiting to receive the antenna harness to mount the headunit in the car. During this time I will have a look on the light to see if it remain possible to change the color.
|
which cable, wiring solution for the rear camera on T7019. ?
I don't understand the meanings of "brake wire" and "reverse" wire on T7019A harness.
I have a rear camera with RCA (OK) red/black 12v/ground cable: where to wire? and near RCA plug (on each side) a short wire (red):where to wire them? My rear camera comes with poor install sheet.
Maybe this.....
http://www.ft86club.com/forums/showp...&postcount=111
"cameras have dual taps on their power wire -- one near the camera and another near the HU. Rydeen's intention was that you power the camera by tapping your reverse lights wire (near the camera). The second lead would be available to provide the reverse gear signal to an aftermarket HU or monitor screen. But you can simply use the lead near the HU to power the camera (and insulate the lead near the camera)."