OEM Subaru BRZ connectors
 

Hello, i am in a process of professionally adapting Lenovo Phab Plus tablet as head-unit.

It will add my own charging, power sequencing, and other electronics to mimic original functionality only by using original tablet functions ( like turn on when car is accessory is turned on, but will not shutdown it by cranking the engine, like original does, basically, will use MCU to track car status, and generate signals for tablet. very simple

My original problem, is that i must use original wiring loom, but i have no idea where i get same connectors ( PCB mounted, not wire), just like in original headunit
http://www.dzsphotography.com/Cars/O..._3884367-L.jpg

So i need mail part that is PCB mounted, any idea about part numbers and/or digikey link ?

And yes, i will be making DIY guide how to properly install tablet to car :) But first, i need to get connectors :(

I think you will have to cut connectors, my friend ;) Or get old/faulty toyota head-unit just for connectors.

By chance and knowledge it looks like i was able to find USB and signal connectors from digikey, so this is great.
For power and seekers, i will use standard connectors, and buy adapter from ebay or local distributors, it should work just fine :)

http://www.digikey.com/product-detai...207-ND/2273586
http://www.digikey.com/product-detai...707-ND/4813976

A - USB
B - Rear Camera Pre-wire
C - GPS Antenna
D - 10-pin & 6 pin power/speaker harness
E - 28 Pin SWC/aux/mic harness
F - Antenna
G - Sirius/XM antenna

--kC

Bump ^^^^ :) Anyone?


--kC

https://demos.starbase7.net/t3Portal...+2016+MY+FR-S+[05%2F2015+-+]&docid=989162&context=ti