Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Issues | Warranty | Recalls / TSB (https://www.ft86club.com/forums/forumdisplay.php?f=72)
-   -   Chatter at low rpm when cold (https://www.ft86club.com/forums/showthread.php?t=97427)

Hawk77FT 11-10-2015 02:08 AM

Chatter at low rpm when cold
 
For over a year I have been having this low rpm chatter coming from the front of the gearbox.
After I start the car in the morning and the rpm goes down to 700, I can hear a rattle/chatter in the gearbox. When I press the clutch the noise goes away but as soon as I take my foot off the clutch the noise is there.
Initially I thought that the clutch or throw out bearing is on its way out, but I had the clutch changed by a professional and it seems that the noise is even more obvious now.

humfrz 11-10-2015 02:58 AM

Did you have the throw out bearing replaced along with the clutch ..... ??


humfrz

Tonypepatone 11-10-2015 06:36 PM

I have same issue if it even is one. Only when it's cold outside but goes away after warm. I'm sure it's just that.

Sent from my Nexus 6 using Tapatalk

MisterSheep 11-10-2015 07:11 PM

Throwout bearing. I can't remember which thread it was but this is common. What clutch did you put in (stock or aftermarket)? Also did you have the throwout bearing replaced when you got the work done?

Hawk77FT 11-12-2015 09:40 PM

Quote:

Originally Posted by humfrz (Post 2446801)
Did you have the throw out bearing replaced along with the clutch ..... ??


humfrz

Yes I did! Replaced with a brand new one...noise still there.

Hawk77FT 11-12-2015 09:45 PM

Quote:

Originally Posted by Tonypepatone (Post 2447495)
I have same issue if it even is one.

English please! :)

Hawk77FT 11-12-2015 09:48 PM

Quote:

Originally Posted by MisterSheep (Post 2447525)
Throwout bearing. I can't remember which thread it was but this is common. What clutch did you put in (stock or aftermarket)? Also did you have the throwout bearing replaced when you got the work done?

Aftermarket clutch, new throw out bearing ,etc.


Even if it s brand new, you still think is the TO bearing?

Tonypepatone 11-12-2015 09:48 PM

Quote:

Originally Posted by Hawk77FT (Post 2449965)
English please! :)

I blame the phone.

Sent from my Nexus 6 using Tapatalk

humfrz 11-12-2015 10:33 PM

Quote:

Originally Posted by Hawk77FT (Post 2449965)
English please! :)

Hey, ....... that's Missouri speak ....... I learnt that after living there for 7 years.

@Tonypepatone .......... jest ah messen wich ya .... ;)


humfrz

Tcoat 11-12-2015 10:34 PM

Broaden your search. I get that there have been loads of throw out bearing issues reported but it seems that it has become the go to recommendation and people are missing the small stuff by looking only for the big.
My guess (without being able to hear, see or feel things) is a loose heat shield or such that only vibrates when it is cold and shrunk up a little. As things warm up it expands just enough to not vibrate.


Like this:
http://www.ft86club.com/forums/showthread.php?t=97195

humfrz 11-12-2015 10:39 PM

Quote:

Originally Posted by Hawk77FT (Post 2449969)
Aftermarket clutch, new throw out bearing ,etc.


Even if it s brand new, you still think is the TO bearing?

Do you trust they REALLY did replace the TOB .. ??

Maybe they put it in backwards ... ??

Maybe they replaced it with another old one, that looked OK....??

Pay me no never mind ..... :bonk:


humfrz

Tcoat 11-12-2015 10:55 PM

Quote:

Originally Posted by humfrz (Post 2450007)
Do you trust they REALLY did replace the TOB .. ??

Maybe they put it in backwards ... ??

Maybe they replaced it with another old one, that looked OK....??

Pay me no never mind ..... :bonk:


humfrz

Conspiracy theories now Hum? Have you been taking your medication? Remember we talked about taking it on a regular basis.

humfrz 11-12-2015 11:04 PM

Quote:

Originally Posted by Tcoat (Post 2450019)
Conspiracy theories now Hum? Have you been taking your medication? Remember we talked about taking it on a regular basis.

DANG IT! ...... I just knew there was something I forgot to do today ...... :bonk:


humfrz

Hawk77FT 11-12-2015 11:06 PM

Not really, as I can tell is from inside the gearbox rather than out. Plus, a heatshield would not be influenced by the clutch pedal.

Quote:

Originally Posted by Tcoat (Post 2450001)
Broaden your search. I get that there have been loads of throw out bearing issues reported but it seems that it has become the go to recommendation and people are missing the small stuff by looking only for the big.
My guess (without being able to hear, see or feel things) is a loose heat shield or such that only vibrates when it is cold and shrunk up a little. As things warm up it expands just enough to not vibrate.


Like this:
http://www.ft86club.com/forums/showthread.php?t=97195


Sent from my HTC_0P6B using Tapatalk


All times are GMT -4. The time now is 01:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.