Front, Rear turn and DLR Question
 

Hey everyone, doing some shopping to replace those halogen with LED on the FRS.

Now I search a few threads and see that there's either the 7440 or the 7443 but couldn't find the answer for the correct bulb for the FRS. User manual just gives me the Halogen bulb.

Looking to replace:

Front and Rear Turn signal

and DLR.

What bulb size should I use to make sure its the appropriate one for the front turns, rear turns and DLR.

Also, do I need the load resistors for the front turns and DLR? Or can I just add those hyperfix relay instead?

Thanks!

http://www.diodedynamics.com/store/l...cion/fr-s.html

they will give you every bulb you will want!

I picked up red 7440s leds for the rear turn signals and a led flasher from O'reilly auto. I haven't decided what I want for the front yet. Probably switch back 7443 leds. Plus the led bulbs bulbs I got actually have a lifetime warr. For whatever that's worth

DRLs are 9005. DRLs do not need resistors.

LED signals will need resistors or you can just get a flasher module.
http://www.modbargains.com/diode-dyn...hyperflash.htm

7440 and 7443 are the same sized bulb.
7443 is a switchback, which means it is dual colored (white/amber).

if you want the lights to remain the same color as stock, get 7440 for front/rear signals.

7443 for the front if you want the signals to be white as you drive, then flash amber when you signal

http://www.ft86club.com/forums/attac...1&d=1377408087