Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   3.7 Final Drive (https://www.ft86club.com/forums/showthread.php?t=95448)

GsxrMe 09-27-2015 11:02 PM

3.7 Final Drive
 
I did it with my turbo Busa to give me slightly less wheel spin and to give me longer slower revs. I can't locate a final drive that is small like 3.7:1

Help:sigh:

fika84 09-27-2015 11:12 PM

Search.. Then find the Lexus IS300 final drive. Or buy one from Weir Performance for the 86-92 supra. There is a BUNCH of information on final drives on this forum if you search it using Google. Or buy my 3.91!!

Freeman 09-27-2015 11:14 PM

Going to this thread

http://www.ft86club.com/forums/showthread.php?t=49288

Pointed me to here

http://weirperformance.com/finaldrivegears.html

Looks like they may be able to get used 3.73 gears or even 3.58. Probably have to call and see if they have it in stock


Sent from my iPhone using Tapatalk

fika84 09-27-2015 11:17 PM

Quote:

Originally Posted by Freeman (Post 2403120)
Going to this thread

http://www.ft86club.com/forums/showthread.php?t=49288

Pointed me to here

http://weirperformance.com/finaldrivegears.html

Looks like they may be able to get used 3.73 gears or even 3.58. Probably have to call and see if they have it in stock


Sent from my iPhone using Tapatalk

I never noticed they were used for the smaller gears! Ain't that some shit...

Freeman 09-27-2015 11:18 PM

Quote:

Originally Posted by fika84 (Post 2403122)
What makes you think they are used?? I can assure you they are NOT used. I bought a 4.88 from them.


Calm down kiddo. It says it right there on the page "used ratios available" then it lists the 3.58 and 3.73 ratios. Sooooooo


Sent from my iPhone using Tapatalk

fika84 09-27-2015 11:20 PM

Quote:

Originally Posted by Freeman (Post 2403125)
Calm down kiddo. It says it right there on the page "used ratios available" then it lists the 3.58 and 3.73 ratios. Sooooooo


Sent from my iPhone using Tapatalk

Yeah, I caught myself while you were writing that.. my bad. Definitely never noticed that!

Freeman 09-27-2015 11:21 PM

Quote:

Originally Posted by fika84 (Post 2403127)
Yeah, I caught myself while you were writing that.. my bad. Definitely never noticed that!


No worries. Misunderstanding.


Sent from my iPhone using Tapatalk

kodyo 09-27-2015 11:51 PM

Find a lexus IS300 with an M85 differential (3.73) and direct swap that into your car. Problem solved. You can pick them up at various car yards for ~$250 for the whole pumpkin. Weir performance with solid spacer is a good solution too if you plan to rebuild current one.

GsxrMe 09-28-2015 08:08 AM

Quote:

Originally Posted by kodyo (Post 2403144)
Find a lexus IS300 with an M85 differential (3.73) and direct swap that into your car. Problem solved. You can pick them up at various car yards for ~$250 for the whole pumpkin. Weir performance with solid spacer is a good solution too if you plan to rebuild current one.

Huge thanks. I rather just purchase a used rear, flush fluid and install. Atleast I'll have the factory granny rear for backup.

slicktop 09-28-2015 08:55 AM

I swapped in an M85 diff into my FRS. Was a direct fit.


All times are GMT -4. The time now is 06:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.