Send a Canadian BRZ to SEMA
 

hey guys,

I'm not sure if you guys know of PASMAGs Tuner Battlegrounds, but it's in it's final stages. My car is currently in the Top 32 which is their "bracket style" tournament. It's essentially an online vote farming session where they rack up tons of exposure at the expense of people who salivate over the prospect of going to SEMA lol.

Voting is done daily on my PASMAG profile page and is monitored via Facebook credentials. Each round goes for 1 week and resets every Monday @ noon. The winner of the bracket moves on to the next, etc etc. I'm on Round 2 of 5.

If you have a spare minute or two and wouldn't mind helping a guy out, i would appreciate the support! And for the haters, it's built not bought lol. All work done by me in my garage :)

Here is the link to vote: http://bit.ly/alexdbrz

For those wondering if my car should be at SEMA or not, here is the build thread: http://toptierimports.com/index.php?topic=6476.0 - I'm not trying to sound arrogant, but i believe it to be one of the most comprehensively modified twins in Canada.

Pics
https://farm8.staticflickr.com/7654/...2ecb9369_b.jpg

Build Thread (as per request) :) - 800+ replies, 40,000+ views on the local Winnipeg import forum
http://toptierimports.com/index.php?topic=6476.0

And parts list:
Current Mod List: *Updated 09/15/2015

Suspension, Brakes, and Wheels
17x9" +35 GramLights 57DR Gun Blue
Project Kics R40 Black Lugs
245/40/17 Continental Extreme Contact DW
HKS Hipermax Max IV GT Coilovers
Buddy Club front control arms with racing ball joints
Buddy Club rear lower control arms
Hotchkis Front and Rear Sway Bars
Perrin control arm braces
Whiteline rear sway bar braces
Whiteline rear end links
Whiteline camber bolts
Whiteline rear subframe bushings
StopTech front/rear stainless steel brake lines
Motul 600 brake fluid
Motul 300v 0w20 oil
Motul Gear 300 75w90 for Transmission and Differential
STI Brembo Front and Rear brake calipers
Hawk HPS Front Brake Pads
Hawk HPS Rear Brake Pads
DBA T3 4000 Slotted Front Rotors
DBA T3 4000 Slotted Rear Rotors
KNS Brake rear caliper brackets
Speedbleeders
AVO Anti-Tramp rear differential bushing inserts
18" x 9.5" Enkei RS05RR in Matte Gunmetallic
265/35/18 Michelin Pilot Super Sport
Kics Iconix black lugnuts
Ichiba hubcentric spacers 10mm with extended studs (front)
5mm hubcentric spacer (rear)
H&R Trak 30mm Spacer (Front)
Blox 60mm Spacer (rear)
Air Lift performance Front struts
Air Lift performance Rear struts
Airt Lift Autopilot V2 air managment
Accuair 5gal air tank (powdercoated gunmetal grey)
Custom DOT approved PTC 1/4" air fittings (bulkhead)


Engine and Drivetrain
Perrin Light Weight Water pump and Alternator Pulleys
Perrin Master Cylinder Brace
Whiteline Transmission bushings
MTEC Shifter Springs
Kartboy Short shifter + Bushings
ECUTEK Cable + License
AVO Stage 1 Turbo Kit
AVO 50/50 Blowoff Valve
AVO Crossover Pipe (Ceramic Coated)
GrimmSpeed hood struts
GrimmSpeed exhaust gaskets
AEM Boost/AFR Failsafe Gauge
Innovate MTX-L Oil Pressure/Temp Gauge
Block8Head Custom defrost vent gauge mount
ATI Vent Pod gauge mount
Blitz EU GT86 specific Oil Sandwich plate with spacer
Grimmspeed black engine cover
Vibrant T-Bolt Clamps
Vibrant Vacuum Manifold
Vibrant Hose Clamps
Spencer Fabrication custom vent hard lines
Treadstone turbo blanket
ProSport remote oil pressure line
Custom dual catch can setup made by Saikou Michi
Perrin 3" Catback Exhaust
AVO 3" Downpipe
AVO 3" Ceramic Coated Overpipe
AVO 3" Ceramic Coated Front Pipe (no cat)
Perrin Cold Air Intake in Black
Delicious Tuning ECBS
Delicious Tuning Speed Density Tune (4 maps)
Target Based Boost Control
Full Blown Motorsports Oil Cooler
Exedy Stage 1 Clutch and Flywheel
Full Blown Fuel Pump setup with Warlboro 485
DW 450cc Port Injectors
Omni 3 Bar Map sensor
Gates Racing V-Belt
Full Blown Motorsports Aluminum Radiator
Full Blown Motorsports Aluminum rad shroud
Dual SPAL rad fans
Chase Bays coolant overflow tank
AVO upgraded 8 PSI actuator
P-Tuning Water/Meth Injection Kit with lightweight battery mount
Odyssey PC680 Battery
Fragola Oil Cooler Lines
Spencer Fabrication throttle body spacer and WMI injection plate
Cusco Liquid-to-Liquid oil cooler
STI Engine Mounts
Cusco Air/Oil separator
IAG billet aluminum master cylinder Cap
IAG billet aluminum clutch reservoir cap
IAG billet aluminum complete dipstick replacement
IAG billet aluminum washer fluid reservoir cap
Prova aluminum oil cap
Apexi coolant cap
Raceseng aluminum oil filter cover
APR Carbon Fiber cooling plate
GReddy Profec II Electronic Boost Controller

Interior, Audio, and Aero
LED Conversion for all bulbs in the car (plate, interior, trunk)
Amber LED front signal indicators
35% Tint
Toms JDM red tail lights
Hella Supertones
Perrin aluminum shorty antenna
Grimmspeed front license plate bracket
STi JDM rear wing gurney flap
STi JDM Push Button Start
Alpine PDXF4
JL C3 650 Speakers (front)
JL C2 350 Speakers (dash)
JL C3 650 Speakers (rear)
JL 10" WS3 Subwoofer
JL sealed subwoofer enclosure
Dynamat Extreme
Weathertech All Season Mats
Backup Camera
Debadged rear
Cusco aluminum E-Brake knob
Eur Toyota OEM arm rest
Aus Toyota OEM Black interior conversion
Rexspeed convex and polarized rear mirrors
Subaru Autodimming Homelink Mirror
Cipher Harness Bar
Takata Drift III Harnesses in Black (driver and passenger)
CaFi Dashlinq4 Toyota Universal headunit
DAMD Carbon Fiber core steering wheel
Prova shift knob
Custom hand made carbon fibre 3rd brake light relocation
Password:JDM Carbon Fibre 3 Piece front splitter
Password:JDM Carbon Fibre Side Skirts
Aero Jacket 1 piece carbon fibre trunk lid with duckbill spoiler
Driver and passenger Bride RO BRZ specific rails
Edirb 023 red stitch seats (driver and passenger)
Seibon carbon fibre hood type DV
Diode dynamics 6k HID headlight bulbs
Move Over Racing front bumper quick release kit
Longacre black adonized splitter support rods
Valenti smoked side markers
JDM Subaru Fog light housings (DRL Deletes)
Prova fender vents
OLM Vision+ DRL LED fog light housings and LED foglights
KMO Activities Todoroki front 30mm fenders (being painted)
GReddy Rocket Bunny V2 side skirts (on order)
GReddy Rocket Bunny V2 rear over fenders (on order)

voted.

Normally, I don't vote in this stuff, but I'm so fucking jealous of your plate, that you get my vote.

lol thanks, I appreciate it.

You mean my jets license plate??

Yes, it's a hard life for a Jets fan when your dad is a die hard Leafs fan and you live within an hour of Toronto.

Wow the Jets plate looks way better/cooler than the usual Leafs plate

-Leafs fan

I started reading the mod list, then I scrolled all the way down saw how long it was and gave up. in all seriousness really nice car, I'll vote for it when I get home tonight. Just for shits and giggles how much have you put total in that car?

Although I know the number, I'll just leave it as "north of $50k" for parts lol. It's a little embarrassing but cars have always been a passion and hobby :) You should see my Toyota Echo ice racer lol

Votes are open to everyone again today (they are reset daily). I'm currently 8 votes back of the guy ahead of me, so I would appreciate if you guys took a minute to vote here:

http://bit.ly/alexdbrz

I wish I could vote for you, car's amazing but I don't have a Facebook.


Sent from my iPhone using Tapatalk

Voted, car is beautiful my friend! Wish I had "north of 50K" to spend on the car lol

Beautiful car sir! Voted!

So impressed by this none widebody build, always have appreciatation for non-widebody, really well done cars.... then saw the additions on the bottom of the list....

Good luck, voted and I will hopefully see you at SEMA!

Lol it's a decision I struggled with for a long time. I had to get wider fenders to
Fit my tire setup with air bags so I got todorokis. Although they look good, the back Looks disproportionately narrow so I went rb v2 sides. I'll be getting them moulded on to clean up the "rivet look" if need be