Tein SRC parts no ?
 

I just receive a set of Tein SRC , but the compression and rebound adjustment is not 16 click , is 30 click !!




Also the parts no is different than DSQ54-81LS1 !!


Just want to know what is the different !!!

Can you forward me your purchase invoice so I can verify that you ordered the right part from us?

You're posting individual damper part numbers, and that part number is correct, and judging from the pictures, you have the correct parts elsewhere too.

Thanks for help , so it is the right parts !?i order the parts from Japan , when i have it install , i turn the bottom and top , getting 30 click ....

Is it weird ? I will have it check again , and use the adjuster and see if is it me counting it wrong !!

I'm sorry, but I'm not familiar with the current JDM spec Tein SRC. You'll need to ask your vendor for support, as I have no knowledge of your dampers. Additional clicks are rebuild overhead; do not go past 15 clicks from maximum damping, or you may damage your damper.

Problem solve ! It is dead click !!

Yup. Common, though I didn't know till now it was rebuild overhead. I haven't even tried to see how many clicks I can get. In fact, I had one adjuster come off in shipping, and the actual adjustment seems to have no inherent stops.

Enjoy.