| Chaetagnath |
07-04-2015 03:01 PM |
Quote:
Originally Posted by Codythatsme
(Post 2309400)
Hello, a while ago there was someone on here selling custom harnesses to retrofit a premium model climate control panel to the base FRS. I was wondering if anyone else is making these? And if so what parts are required to buy? (Like the heat box, temp sensor, etc?)
Thanks.
|
I believe that guy who was making the harnesses got banned. But, before he was banned, I bought one of his harnesses. The harness itself is pretty complicated, but if you can figure out the wiring it would be possible I guess. I have all the parts but haven't actually done the install yet since it requires completely disassembling the dash, and as this is my daily driver I haven't had time to do it yet. If I ever do I will try to take pictures of the process.
In addition, you need the following parts:
72311CA061 the climate control panel
72100CA070 the automatic heater blower unit assembly
73730CA020 the temperature sensor
72313CA010 the hose assembly for the temperature sensor
All in all its at least 1000 bucks for those parts unless you can source them used.
The heater blower unit has to be switched out. I tried to retrofit my manual control heater blower unit with the parts which are different between the two, but it is just different enough to not be feasible. So, you must swap the whole unit out. Since its behind the dash, the dash must completely come out.
If you are interested, I included a picture of the guys harness. Your best bet would be to track him down somehow. I only contacted him through the forum, but a few people actually did this retrofit, and maybe they can PM you contact info for him.
http://i737.photobucket.com/albums/x...psclcxxwri.jpg
|