Bore size help
 

Okay guys I need some help. As we all know the twins have a 5x100 lug pattern. I'm buying konig torch wheels that have a 5x114.3 lug pattern thus I'm also buying 25mm spacers/lug pattern adapters that will change my lug pattern to the 5x114.3. The spacers have a bore size of 67.1mm and the wheels have a bore size of 73mm and the cars bore size is 56.1. So my question is, do I get 56.1mm to 73mm hubcententric rings or 67.1mm to 73mm rings?
Wheels
18x10 +35 rear
18x9 +35 front


Sent from my iPhone using Tapatalk

Hub-centric rings aren't really necessary, because our wheels are lug-centric, not hub-centric.

You're running an 18x9 +35 wheel, plus a 25mm conversion spacer? So basically the wheel is 18x9 +10. That's going to stick out. A lot. Do you have a widebody kit on your car?

For reference, here's an 18x9 +21. Yours will stick out another cm.
http://www.ft86club.com/forums/showthread.php?t=38410

Yea I'm going rocketbunny


Sent from my iPhone using Tapatalk