torque specs for front and rear subframe bolts
 

cant seem to find it anywhere.. anybody? I`m installing the rigid collars on the car and the instructions are in japanese which does me no good lol.

Referring to the rear crossmember inserts?


http://www.ft86club.com/forums/showthread.php?t=20920

hmm... didnt see any torque specs on there...

@F1point4 puts the torque specs on the pictures themselves. It looks like 107 ft/lbs for the four main bolts. They're also on the second picture showing the manual's breakout image. Where it says "145 (1479, 107)," the 107 is ft/lbs. I think the 145 is nm and the 1479 is kg/mm, but don't quote me on that.

how did i miss that..!

now i just need the front ones...

Also 107 ft/lbs for the large bolt and 52 ft/lbs for the two small bolts.


http://farm9.staticflickr.com/8189/8...91355142_c.jpg

i mean the front cross member though... not the front of the rear subframe :) thanks for all the help.

I don't know. What are you installing on the front crossmember? A brace?

Maybe you can find your torque values here.


See first post...

projekt zeal86 build

I`m installing the rigid collars. now I`m really confused.. why do i have to remove the steering linkage? anybody speak japanese? LOL

https://scontent.xx.fbcdn.net/hphoto...8c&oe=55F2DA5A

https://scontent.xx.fbcdn.net/hphoto...35&oe=56308EC8

https://scontent.xx.fbcdn.net/hphoto...c5&oe=55EA682E

https://scontent.xx.fbcdn.net/hphoto...8f&oe=55F84A68

https://scontent.xx.fbcdn.net/hphoto...39&oe=562DAE39

https://scontent.xx.fbcdn.net/hphoto...53&oe=5623EDC5

but i guess i found the torque specs.. just need to understand this damn thing lol

@ichitaka05

Just get under there and see how it goes. I would assume it's just for more clearance for something, but you won't know until you try. It's not that many bolts to give it an attempt.