Will 9.75 wide fit the rear flush?
 

Just curious. Also, has anyone tried 8.75 in the front with success?

Wheels without off-sets won't fit all.

Back to the drawing board I guess.

:laughabove::bonk:
















:D

+35

http://www.1010tires.com/WheelOffsetCalculator.asp

Stock wheels are 17x7 +48

Just use the calculator and then go outside and measure.

Here is a good place to start:
http://www.ft86club.com/forums/showthread.php?t=7237

I saw that but I wish they had more than just those two pictures. I need a picture of the car from behind at the side to see if the wheels are poking out any.

I dont have any means of taking my wheels off as of right now :p

I ordered 18x8.5 +44 & 18x9.5 +38 wheels but I won't have them until the 1st or second week of July...if you don't have wheels by then keep an eye on me and I'll make sure to cover all of the dynamic angles for everyone to see.

Do you think 9.5 with +35 will be able to turn full radius on our car?

Im also wanting to know if 8.5 +35 will fit the front and still offer full turning radius and not hit the suspension.

nvm I need to correct myself on what I just posted.

like denkigrve said..check out the FR-S in the link he posted because that one has Work wheels on it with the Spec: 18x9.5 +30mm all around..looks like the tire is stretched though on it and not a full fitting tire.

This was from RavSpec on that thread:
--------
Quote:
Originally Posted by dnjshin0bi
will 18x9.5 +38 all round and 225/40/18 work? no scrub either??
--------
yeah, 18x9.5 +38 will work. Need drop though.

Can you tell if those 9.5 are poking out the front? I know they arent in the back.

They look like they do alittle bit to me...here's another pic I found of some SSR's

post by dnjshin0bi
1. SSR Type F
F&R - 18x9.5 (+?) wrapped in 225/40/18 Front - 245/35/18 Rear
http://www.ft86club.com/forums/attac...9&d=1339064833

http://www.ft86club.com/forums/showthread.php?p=247412

That's probably as close as you'll find to a fitted 18x9.5 straight ahead pic.

i think the above picture is running +40 offset. based on 5x114.3mm conversion and on the SSR website. 18x9.5's go to +40

if its +40 offset in the front it'll leave 23mm less room inside the inner wheel guard... according to @PERRIN_Jeff's post (http://www.ft86club.com/forums/showthread.php?t=6914) it'll scrub like hell.. +30mm offset is a better option seen in the 18x9.5 +30 Kiwami pics somewhere in the forums