clunking noise after LCA install
 

so I've been having the ST coils on the car for about 6k miles with no issue. 2 weeks ago I finally got to put on the voodoo 13 LCA and the noise started to come. at first I thought it would be the end links problem like people had before. so today i removed the end links and sway bar out of the way and the noise still going strong when i put weight/pressure on the car's body.

please take a look at the video i put together in different angles and hope somebody can give suggestion or even a solution. I really have no idea where the noise is coming from....

https://youtu.be/_Z90AbCfZxk

Check the jam nuts for your adjusters

I had a similar noise when I was beta testing the Figs Mega Arms. What I did was to bounce the car up and down while placing my hands in different locations until I could isolate where the noise was coming from. For me, it was the pillowballs. One pillowball seemed to have a tiny bit of play in it that would result in a clicking noise just like your video.

I decided to just go with SPC arms and haven't had any noises since. The SPC arms use urethane mounts just like the stock arms so there is a little bit of compliance. Would have preferred to stick with the Figs arms, but the clicking was just driving me nuts while driving.