need a clutch assembly
 

Hey guys im gunna need a clutch assembly, where can i get one for good price (dealer is telling me $ 3,000+

not the dealer.... There is a used one in the for sale section. Or just get an aftermarket stage 1 clutch (I'd go with Clutchmasters).

stock clutch is from Exedy Stage 1 - if memory serves me correct

OEM clutch is Exedy, but not stage 1. Stage 1 is a still an organic clutch, but it's a step up from OEM. Compared to the Stage 2 clutch, which has a three puck cerametallic disc.

OEM clutch ($222): http://www.ft86speedfactory.com/exed...h-kit-988.html
Stg 1 clutch ($395): http://www.ft86speedfactory.com/exed...h-kit-790.html
Stg 2 clutch ($550): http://www.ft86speedfactory.com/exed...utch-1995.html

I found the OEM flywheel on SubaruOnlineParts.com for $210.
link

What would you guys recomend stage 1 or just oem

What kind of driving do you do?

Daily driver but i do drive a bit hard put i plan on taking it easier on the car after replacing it

The only way I could see a $3k quote is if by 'clutch assembly' they mean more than just the friction plate, pressure plate, and throwout bearing as that job is at most $1,500 (and could be as low as <$500 for a specialty shop).

What is the problem that needs fixing? You could go do the clutch job but with zero success if you're trying to fix say a noise in the pedal/hydraulics that could be fixed with a squirt of lube.

Also, what kind of power mods do you have?

How many miles on your car before needing the new clutch?

The problem i was having was hard to put the car into gear, i had to jam it into gear actualy, and at low rpm taking off car was kinda shaky, also i noticed my clutch pedal was not coming up like normal

Im at 29k

And itts bone stock

Please don't freak out!

How much experience with MT?
A novice can ruin a clutch in a heartbeat without even knowing it.