ABS + Traction Light After Fog Install
 

So i just got done installing my fog lights into my FRS. After I got done, took it for a spin and the ABS + Traction control light came on after I exceeded 15 MPH. It goes off after I restart the car, but then comes back once I exceed 15 MPH again.

The only thing I can think of that may be causing this is somehow the wheel did not go back on straight (since I installed a new stalk). When driving straight the 12 o clock position of the wheel is at the 10 o clock position. Could this be causing the issue?

I am going to try and fix the steering wheel issue tonight. Just though I could pick some knowledgeable forum members brains in the mean time.

Thanks

So I figured it out.

What I did was drive down a dead end street and let the wheel find dead center by itself, stopped took wheel off then put it back on straight. No more issues.