sold
 

sold

I'm really interested in the headers. Anything wrong with them? Why are you selling them? Too loud?

Nothing wrong with them, my car is in the shop getting a turbo kit installed :thumbup:

OK...how much louder will my car get if I change nothing but these headers? I'm assuming I'll need to get new gaskets too, right? Unless you're including new gaskets in the package...

I would need two header to block gaskets, and 1 gasket between header and overpipe, yes?

Couldn't you just ask them to change the part that connects to the overpipe to the part that works with the turbo? Which turbo system you going for? :)

The car won't get crazy loud since this is EL and catted. If this was catless UEL, then it would get very loud. You can always increase loudness by changing your catback and front pipe. You can use your stock gaskets for this, otherwise gaskets are very cheap.

The turbo manifold that came with the kit is meant for the turbo so I'm going with that. This is the Hexon RR350 kit.

yikes. i need to calm down. if i buy this, i'll need a OFT to tune. is that the titanium coating on the header? :(

Yes sir, the titanium is beautiful. Here is a 3rd gear pull dyno graph for everyone.

Max whp went from 162 to 182 whp (20 whp gain) and you can see where the torque valley used to be at 4k rpm, it went from 114 to 135 ft-lbs (21 ft-lbs gain)!

http://i.imgur.com/Bi9qUoz.jpg

@_@

Do you take PayPal?

Yeah, I'll PM you my PayPal email.

Do you accept favors? ;) jkjk

:barf:

I do taxes soon. If I'm positive I just might pull the trigger.