Gauges for supercharger
 

Hi Guys,

I am putting a supercharger on the car and want to keep gauges to a minimum, I have decided to go with AFR and Boost Possibly Oil Temp.

What of the 2 following would you recommend ?

http://www.ft86speedfactory.com/aem-...-afr-1585.html

http://www.ft86speedfactory.com/inno...play-1809.html

Thanks Guys

the inno, hands down

What makes you say that tho ?

p3 vent pod gauge @ mod bargins. 10 gauges in one, sits in the driver side a/c vent (and allows the ac to pass through.)

Android HU and

http://www.ft86speedfactory.com/hks-ob-link-302.html

I prefer data coming from a hard wired sensor straight to gauge rather than the car processing the information then transferring it to readable data to the OBD then to the bluetooth :thumbup:

to each their own :)

I assumed with the P3 Gauge you could only display one peace of information at any time, is this correct?

This.

I had the innovate in my other Subaru so Im bias but thats what I would go with

Yes, there is a button on the front of the gauge allowing you to easily toggle whenever you want though.

I'm with you on the android HU, but jesus that HKS is over priced.

how about one of these
http://www.aliexpress.com/item/YD182...856749046.html

or one of these
[ame="http://www.amazon.com/ELM327-Version-Bluetooth-Diagnostic-Windows/dp/B00QUL6U8Y/ref=sr_1_1?s=electronics&ie=UTF8&qid=1421897896&sr =1-1&keywords=obd2+bluetooth+adapter"]Amazon.com : ELM327 Latest Version V2.1 Bluetooth Super Mini ELM327 OBD2 II Scan Tool Car Auto Diagnostic Tool for Windows (blue) : Electronics[/ame]

No, no no. If you want any usable real-time info, you need to not cheap out on the OBD2 reader. The website for the torque app lists some good ones. The problem with the cheapos is that they have a very low sample rate. If all you want is to read/erase codes or make sure your idle temps/pressures/trim is within a certain range, then one of those is fine. But if you want to use it for gauges, or do some data logging for your tune, you need to have something a little more substantial.

for me, its AEM failsafe for AFR and boost,

[ame="http://www.amazon.com/AEM-30-4900-Wideband-Failsafe-Gauge/dp/B007ZAQLF6/ref=sr_1_1?s=automotive&ie=UTF8&qid=1421941793&sr= 1-1&keywords=aem+failsafe"]Amazon.com: AEM 30-4900 Wideband Failsafe Gauge: Automotive[/ame]


then the innovate oil press/temp

[ame="http://www.amazon.com/Innovate-Motorsports-3852-Function-Temperature/dp/B0081WP9CS"]Amazon.com: Innovate Motorsports 3852 MTX Digital Series Dual Function Oil Pressure and Temperature Gauge Kit: Automotive[/ame]