Corroded pins/connectors in light harness
 

I am trying to replace some extremely corroded connectors in a harness for a DRL light strip. (this one: http://www.ft86club.com/forums/showthread.php?t=25959)

I bought the kit second hand, but stupid me, didn't ask for more pictures of the connectors and didn't think road salts would be so devastating on supposedly weather sealed connectors. I learned my lesson, I just want to fix it up so I could use this.

The female terminals:

http://i.imgur.com/0cEOaF5.jpg
http://i.imgur.com/fyeIkUj.jpg
http://i.imgur.com/MGzu5XY.jpg
http://i.imgur.com/kIs6Omw.jpg

The male terminals:

http://i.imgur.com/YH5bnII.jpg
http://i.imgur.com/5eTUoIL.jpg
http://i.imgur.com/NptjZJz.jpg
http://i.imgur.com/3nQ4oHe.jpg
http://i.imgur.com/g1yCO7m.jpg

Does anybody know what these things are called and where I can buy them? I'll probably need 4, to repin/terminate all the connectors. Thanks in advance for any help or advice.

*EDIT* After some more digging based off of @jonzhuxD's suggestion, I have found the actual datasheet for the connectors and housing. Check it out:

http://www.seaps.com.sg/pdf/b_mt_e.pdf

Go to radio shack purchase a spray can of gold connector this product will clean and seal your present connector without replacing product cost about $20.00.

Unfortunately, I didn't take a picture of the REALLY corroded connector. The rounded tip on the worst one has broken off and it no longer makes a connection to the female portion, so I need a new one.

They're Denso connectors. Here's a link to some, might be able to find them cheaper, I just grabbed the first link on eBay.


http://cgi.ebay.com?ViewItem&item=400778203186

that's exactly it! Thanks a lot! Now to find a cheaper version...

CocaCola will remove the corrosion, you can use a variety of protection products, I use the battery stuff myself.(its red.. idk what its really called)
you can clean corrosion like that with coke about 3 times before the terminal will become useless in my experience.