will rpf1 73mm work w our frs?
 

quick question

will 17x8 +45mm and center bore 73mm work on our car?

sorry for the newbie question.

my first ever aftermarket rims.

also can I just transfer my tire and tpms onto this rim?

http://www.ft86club.com/forums/showthread.php?t=10257

Just make sure you buy them in 5x100 bolt pattern and 4 hubcentric rings (not required but recommended)

@van_fc3s Great choice of wheel! As long as the bolt pattern is 5x100, the specs you have listed above will work just fine. The 73mm hub bore is in place to allow for multiple applications. It is best to get a set of hubcentric rings when running after market wheels to ensure proper wheel alignment when mounting on the vehicle. As far as your tires and TPMS sensors swapping, that also should not be an issue. When swapping the sensors you will need to purchase sensor specific rebuild kits, that include new rubber seals, valve core, and grommet. Tire shops such as Discount Tire can provide you with all of this and can mount and balance the tires on the new wheel for a small fee. Hope this helped. Happy motoring, please feel free to pm with any more questions you may have regarding your FRS. Happy Motoring!:burnrubber:

Taylor

thank you so much for the prompt reply guys am really trully appreciated along w the tips.