Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Euro spec Rear Fog (https://www.ft86club.com/forums/showthread.php?t=74763)

BRZ888 09-24-2014 10:39 AM

Euro spec Rear Fog
 
I finally sourced out the part number that will make the rear fog work just like it came from the factory.

This is for LHD vehicle.

1. Stalk switch with auto feature Toyota SU003-02473 = Subaru 83115FJ110
2. Harness SU003-02576
3. Lens (optional) i opted to buy just because of the factory drilled hole
SU003-02529
4 Relay SU003-02434

First! you need to check if the opposite of the harness has the 3pins. The connector is located at below the trunk lock.

Second, locate the fuse box on the engine compartment check if there is terminals beside the relay of FAN NO.2 Also, a 10AMP fuse.

3rd, once you have these you can order the parts!

Knshro13 09-25-2014 12:27 AM

We don't have the harness running to the engine bay fuse block in the US. Sucks for us.

WelshJ 09-25-2014 01:46 PM

Quote:

Originally Posted by BRZ888 (Post 1959003)
I finally sourced out the part number that will make the rear fog work just like it came from the factory.

This is for LHD vehicle.

1. Stalk switch with auto feature Toyota SU003-02473 = Subaru 83115FJ110
2. Harness SU003-02576
3. Lens (optional) i opted to buy just because of the factory drilled hole
SU003-02529
4 Relay SU003-02434

First! you need to check if the opposite of the harness has the 3pins. The connector is located at below the trunk lock.

Second, locate the fuse box on the engine compartment check if there is terminals beside the relay of FAN NO.2 Also, a 10AMP fuse.

3rd, once you have these you can order the parts!









If you don't mind me asking, how much for the lens?

BRZ888 09-27-2014 10:41 PM

Quote:

Originally Posted by WelshJ (Post 1960710)
If you don't mind me asking, how much for the lens?


The lens cost $150 just for the genuine cut hole. :thumbdown:

BRZ888 09-27-2014 10:42 PM

Quote:

Originally Posted by Knshro13 (Post 1960094)
We don't have the harness running to the engine bay fuse block in the US. Sucks for us.

That really sucks! I am sure BRZ should have it...In your case just modify it.:D

Heru Farukon 10-11-2014 03:54 AM

Pictures?


All times are GMT -4. The time now is 10:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.