| DavidBob |
08-29-2014 10:07 AM |
Quote:
Originally Posted by BRZ'13
(Post 1922353)
Tried searching but could not finding anything. I am having a weird problem with my BC BR coilovers, specifically the rears. One side is completely maxed out because the threads cannot spin into the shock body any further. The other side still has 1.5"+ of low but when measuring from fender to ground on a flat surface they are both 25" from the ground. The fronts are 24.5" each and i would like the rears to be 25.75" but the one side cannot go lower.
Im thinking it has something to do with the preload but i dont see how that has anything to do with height
|
Could it be that your not on completely even ground? I wouldnt measure from the coilover to the ground i would just set both rear coils to the same hight, put it on the ground and go from there. If one sides sitting lower or higher then adjust that side. Right?
And yes preload has nothing to do with it, set the preload and dont touch that again.
-Dave |
