Greddy kit dyno sheet
 

Here are my new #'s after having some new stuff put on and tuned.

Sent from my HTC6435LVW using Tapatalk

My bad dyno sheet pic turned out bad will try another later that is actually legible

Sent from my HTC6435LVW using Tapatalk

Tried lightening it up a bit

Sent from my HTC6435LVW using Tapatalk

Looks the same to me. Not bad numbers on 93 octane. Dat torque curve. :drool: It looks like you made 281 hp and 243 ft-lbs. My guess is that you are dropping a couple PSI past 6300 RPM which is when the torque starts dropping and why you didn't end up making a larger horsepower number.

The 281 is on e85

Sent from my HTC6435LVW using Tapatalk

250 on 93

Sent from my HTC6435LVW using Tapatalk

93 it's 7-8lbs of boost and on e85 it's 11-12

Sent from my HTC6435LVW using Tapatalk

You can definitely run more boost than that on 93 octane and on E85 before that turbo will run out of steam.

So how I crank that up haha

Sent from my HTC6435LVW using Tapatalk

It seemed low coming outta there, it was a mustang dyno for what it's worth

Sent from my HTC6435LVW using Tapatalk

i wouldn't worry about the dyno, you should have been in the 10psi range on the 93 and the 15-20psi range for the e85... roughly.

At least this is what i've found in my research.

I've heard 14psi is pretty much the end for greddy's kit

Sent from my HTC6435LVW using Tapatalk

eww.. well, guess that's another reason I'm glad i didn't go with them.

guess you could upgrade the turbo later

Ya I acquired this one I didn't buy this kit. I'm prob gonna take it off and sell it and buy a different one this winter maybe

Sent from my HTC6435LVW using Tapatalk