Enkei Valve Stems
 

So I've noticed that Enkei has different part numbers for valve stems for different wheels. For example, I see NT03s use valve stem V365 while rpf1s use valve stem A379. I'm guessing these aren't interchangable? I'm looking for blue valve stems for my nt03s but now just realized that they might be different from the blue rpf1 valve stems I keep finding.

RPF1 Valve stems
http://cdn3.volusion.com/fnjtj.shffw...jpg?1325513601

NT03 Valve stems
http://i58.tinypic.com/300rvo7.png

My NT03's (currently for sale) used the bottom valve stem in your original post.

Actually, 2 of them per wheel.

If the valve stem opening on the wheel & stem seat is the same, you can interchange valve stems.

Having said that, the bottom pic (NT03) seems to be upside down on the rubber seal on the outside.

The only way to know if it'll work is to compare the rubber seal of the RPF1 valve stem vs NT03 valve stem, and see if the shape is identical or not.

-alex

Does these Valve Stems work with stock TPMS ?

They should both work, no need to have 2 seals, but some stems do. They're all just cheap $1 stems and varying lengths, so while they may all bolt on just fine, there may not be enough clearance at the valve stem hole area to fit the air nozzle.

As for TPMS, no, those use special stems.

Nope. The TPMS has a built in valve stem, so you can't run a different one.

The stock TPMS work no problem with RPF1's though (my stock sensors are in my RPF1's).

Thanks for the reply man, appreciated it