Scan Gauge Help!!!
 

Alright, so I was super happy with my scan gauge, until about 10 minutes ago.
I used the oil temp code last weekend and it worked perfect.
Found an AFR code on here and wanted to add it.

Couldn't get it to work, got a cell.

Cleared the cell, but now the gauge is messed up.
Oil temp won't work any more either and the available signals and their 3 letter combos changed!!! WTF?

I tried changing the different CAN modes, but no luck.

Help please.

U0073 was the code btw.

I've had this.
erase the new code that you entered by blanking the first character of the TXD (it might be one of the other sections, check in the manual on how to erase) then turn it off and on again.

I'll try a reset (if there is one).
All I have done to the gauge are the two codes, which don't work anyway...

Isn't this the code that is showed when there is an issue with the OBD2 port? Given the cheapy design of our obd2 ports these codes aren't all that uncommon...

I think it has something to do with me switching the CAN type by accident or something...
Not sure though.

The AC wouldn't come on anymore with the code up and the traction light was on...
Weird shit.