Need help with boost control install.
 

Got a pnp boost controller from sbd and need to know where the hoses connect. I know one goes to the turbo actuator but where does the other one come from. When I look at the pictures in his thread it looks like it Ts off of the hose on the break booster but in the post it says hose off of turbo. If I connect to the actuator where does the hot side turbo barb hose connect. Pics would be awesome. Thanks.

Sent from my SPH-L710 using Tapatalk

the common ports (when you blow into one, the air comes out the other) go to the nipple on the turbo compressor housing, and the other to the wastegate nipple (internal wastegate im assuming). the 3rd port can just be left to vent to atmosphere. that configuration will run wastegate spring pressure with the controller unplugged. then you have the solenoid duty cycle tuned from there