tom's tail lights issue
 

i installed my tail lights and got the flasher installed also and when i use the left turn signal it does not work at all..also when i push the emergency lights same thing..only the right side works. I sent the video of it happening to RavSpec which i purchased the lights from. Not much help except that they would contact Depo and let me know but this was yesterday morning. :iono: anyone else had this issue?

These USDM Tom's? or JDM's requiring re-pinning? Guessing they are USDM. Sounds like you may have a defective unit..

US DOT approved models are straight plug & play. He may have the JDM spec ones.

yes USDM

USDM ...these are straight plug and play ..the right tail light works like a charm..my left when i press the brakes the light comes on but blinker wont come on at all or even show in the dash thats the left blinker is on.

Try reinstalling your original flasher relay and see if it works then. Might have gotten a bad one.

Just ordered a set of USDM Tom's tailights last weekend.

They will be deliveried this Friday.

I tried soooooooooooooooo hard not to open this thread.



。https://encrypted-tbn1.gstatic.com/i...IerihRZ4coOo2Q

Im at work but I will try it in the AM . Its just weird that the right works and not the left. So far ravspec ain't doing much to help with the issuebut we will see if they get back at me sometime soon.

Like everybody else said, try the original flasher relay with the bad tail light, or you could also try the new flasher with the OEM tail light, make sure the that works. Doing both would be a good double check to see if the problem is with the relay or the tail light itself.

Also just double check the connection at the right hand light and make sure it is not something silly like the plug is not pushed in all the way

I did do that same issue. I havenot used the original oem flasher though I will try that today.

tried it and it still didnt work. but the original flasher works with my oem tail lights . Ravspec told me to pack them up and ups will pick them up so i can get them replaced.

unlucky mate, probably something slighty miswired from factory. Only one I have heard of to date :(

Yah probably..but hope to get the new ones in soon :D