Racer X toe arms
 

Anyone install these yet? I searched to see if anyone did a how too, but no luck with that. If you have can you PM' me or point me in the right direction.

I have them fitted. They should be fitted at a alignment shop unless you can do alignments at home. The actual installation is so straight forward they don't require a "how to".

Remove OEM links. Install new ones. Take to alignment shop.


Done

They're forgetting the most important part. Make sure you have a Pitmann arm puller or else you're going to have a hell of a time. Also, be careful driving, it's very dangerous installing these plus LCA's at the same time then getting to an alignment shop.

Sincerely,

Whiteline toe arm installer.

Installing at hobby shop on base and they have a hunter something something alignment machine there. The thing I was asking about was the spacers on the part that attaches to the knuckle...I am not that much of an idiot i know its unbolt then bolt on the new just some small stuff i didn't know