Alignment Help Needed
 

So I have ST coilovers w/ Enkei Kojins 18x9.5 45+ offset square set up so my next step was to go get my alignment now Toyota says I need control arm because camber and there unable to do anything without new control arm ? Is this true or is there another way to avoid buying another part .. The only issues there having is in the rear


Sent from my iPhone using Tapatalk

Posted in wrong area please delete MODS sorry !


Sent from my iPhone using Tapatalk

Yes. There is no camber correction from the factory. You need aftermarket lower control arms or the adjustable upper control arm bushing from whiteline (they are a pita though). Unless you are ocd and need it even or it is over 2° it should be fine as is. Just make sure your toe is zeroed.

Sent from my LT30at using Tapatalk

So what do you recommend ? Thanks so much for the help


Sent from my iPhone using Tapatalk

Like others have stated there is no adjustability with the stock control arms. Buy the cheap/decent SPC LCA's that have +/- 2 degrees of camber adjustment for ~$195 and call it a day.

I have some gold j2 lca new for sale just saying

http://i54.photobucket.com/albums/g1...48805C87DD.jpg

Same set on my car

How much ?


Sent from my iPhone using Tapatalk