Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Winjet JDM Headlight LED + lowbeam (https://www.ft86club.com/forums/showthread.php?t=62204)

JW89225 04-01-2014 05:21 PM
Winjet JDM Headlight LED + lowbeam
 
Is there anyway to make the LED bar to turn on with the lowbeam/highbeam ?

86SPEED 04-02-2014 05:40 PM
yes there is. with this part right here

http://www.fteightysix.com/whats-new.../#.Uzx1wfldW0k

Mr.Jay 04-02-2014 06:13 PM
I believe this is what you are looking for however not sure if it works on winjets but deff works on the series 10 and jdm lights. I will be giving this a shot once I throw my winjets on too

86SPEED 04-02-2014 06:20 PM
Quote:
Originally Posted by Mr.Jay (Post 1644656)
I believe this is what you are looking for however not sure if it works on winjets but deff works on the series 10 and jdm lights. I will be giving this a shot once I throw my winjets on too
the issue your going to run into is the winjet has 4 wires, two for the headlight, two for the highbeam/drl. the part i know your talking about needs the power from the parking light wire. then it back feeds the system to the other side. what we make and sale here does not back feed and simply plugs into the plug and crimps in line of the drl wire.. its easy to do.

brokedrifter 04-02-2014 11:44 PM
Quote:
Originally Posted by fteightysix (Post 1644683)
the issue your going to run into is the winjet has 4 wires, two for the headlight, two for the highbeam/drl. the part i know your talking about needs the power from the parking light wire. then it back feeds the system to the other side. what we make and sale here does not back feed and simply plugs into the plug and crimps in line of the drl wire.. its easy to do.
Is this something that you have to cut factory wires to install or just worse within the winjet headlight?

86SPEED 04-03-2014 02:04 AM
Quote:
Originally Posted by brokedrifter (Post 1645491)
Is this something that you have to cut factory wires to install or just worse within the winjet headlight?

We made it so you do not need to cut any factory wires - It taps and cust one wire on the winjet in side the housing

Mr.Jay 04-03-2014 08:00 PM
Quote:
Originally Posted by fteightysix (Post 1644683)
the issue your going to run into is the winjet has 4 wires, two for the headlight, two for the highbeam/drl. the part i know your talking about needs the power from the parking light wire. then it back feeds the system to the other side. what we make and sale here does not back feed and simply plugs into the plug and crimps in line of the drl wire.. its easy to do.
Good to know. I wasn't too sure if it would work on winjets consider the harness is different.


All times are GMT -4. The time now is 04:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.