JDM 86 Airbag part number confusion
 

I'm in the process of ordering the 86 airbag from Japan but have found two different types.

I'm using SU003-03410 as the part number. The results are as follows (the number signs represent japanese characters that I can't decipher):



##### ------------------- ##### --------------#####
1 SU003-03410 ------------ 201203-201308 --------- ZN6
2 SU003-03410 ------------ 201308-(nothing) ----- ZN6 - B


The first column is obviously the part number. The second column (I'm assuming) is the model year. The third column (I'm assuming) is the trim/style. If my assumptions are correct, I should get the airbag #2 for the model year 201308 and trim/style zn6-b, correct? Or would it not make a difference?

Just trying to get the correct info before I spend $600+.

Also, sorry for the shitty formatting, couldn't figure out any other way to space it out.

IIRC...there are two (2) different part#s for the airbags, as follows:

SU003-03410 - Single-stage airbag *will require swapping over the detanotor

SU003-03413 - Dual-stage airbag *direct-swap to our FR-S (USDM), since we also use dual-stage

**I know this doesn't exactly answer your question, but thought I should throw the info out there too.

JDM 86 Airbag part number confusion
 

I'm aware of that but there are two different ones for SU003-03410 as well. There's a Japan-spec one and a euro/overseas one as well.

Thanks anyway



I guess as long as I'm switching the detonator it shouldn't matter which one I get, right?

You don't need to swap the detonator if you get SU003-03413, that is the point @DekaMori is trying to make.
Save yourself the trouble and get the dual-stage because they cost the same and look the same anyway.

I understand but the only one that I was able to find was the SU003-03410.

where are you ordering these from?? Where can i order the dual stage one

I'm in Japan so I'm ordering from a local shop, I'm not sure where you can find the dual stage

do you know where i can order the dual stage one

Ah, ok gotcha. The two parts should be identical, but I agree that you should get #2 since it falls within your model year, just to be safe.

Sorry, not sure...probably need to source from outside JP, as item was intended for export models.

@Eg0 - if you're in jp right now, perhaps may want to check out/swing by upgarage to see if they have any laying around and swap your detonator when you get back state-side

@DekaMori

I wasn't able to find any dual-stage. I'm going to go ahead and order the single stage and swap it out when I'm back. Thanks for your help.