OEM Tail light connectors
 

Looking to wire the fog light as 4th brake light. Wanted to do a plug and play solution. I think I found the connector and a source. Not 100% positive these are the right ones but pretty sure they are. Ordered some and will update post later to confirm either way.
Sumitomo TS 090
A guy in Japan sells these. Bought some other connector from him for my Honda before. www.Easternbeaver.com

I'd be interested if they turn out to be the correct connectors.

Sent from my SGH-I337 using Tapatalk

Interesting, having to cut into the OEM harness is the main reason I haven't installed rear fogs yet. Let us know your results.

Correct Connectors
 

So i got the connectors today and they are the correct ones. Took 10 days from placing the order from Japan to east coast USA with standard cheap shipping. Not bad.

These are the two parts you need to make up a cable.

4 Position TS 090 Male Connector
Item# 4P-TS090-M

4 Position TS 090 Female Connector
Item# 4P-TS090-F

I checked the wiring diagram for the pinout. Wire colors ( i tested these with a multimeter)

Light Green - STOP
Black - GND
Yellow/Green - Turn
Red - Tail

Going to crimp/solder up a cable to run my 4th brake light tomorrow. Dont expect any surprises.

Sorry but could you link to the actual connector? I clicked around on the site but couldn't find the two PN's you have listed. Thanks

Would love to know where you got them and pricing.

http://www.easternbeaver.com/Main/El...onnectors.html

On this page. TS series 4 position connector.
$4.19 ea for male/female with crimp pins. You will probably need some sort of universal crimp tool. I have one at work so I didn't need one.

Finally got my connectors! took about a week and a half. Gonna get started on my Y harness tomorrow!

Fantastic find OP, I was looking for these connectors as I didn't want to wire the iJDMToy 3rd brake light permanently to the car wiring. Until I find the time to research and route a long cable for fog light functionality from the front fogs, this will do nicely.

That said, either you posted the wrong link or the website got updated and ruined the link, but that link takes you to HM and MT type connectors. The correct link to TS series connectors is this:

https://www.easternbeaver.com/Main/E...090/ts090.html

I have a friend that makes PnP harnesses for 4th brake lights. They're like $12 shipped.

I'd be interested in one. Care to link?

i use this for whoever needs one in the future:

https://www.ebay.com/itm/303483893103