Need more camber up front
 

With my current setup I am only running bc racing coilovers as far as front suspension goes. With the camber plates maxed out I can get around -2° tops but looking to get a little more (another degree or so).

I am considering getting some camber bolts to go with it but was wondering if they will function properly with the bc coils. Also my other concern is will the camber bolts hold up under constant heavy load (eg. drifting)? Any feedback is appreciated

Check how your camber hats are set up. You can flip them for increase if haven't already.

Camber bolts will hold up fine. They have a retaining pin that keeps them from rotating over.