Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - New full carbon fiber engine cooling plate from APR

http://cdn2.bigcommerce.com/server35....1280.1280.jpg
http://cdn2.bigcommerce.com/server35....1280.1280.jpg
http://cdn2.bigcommerce.com/server35....1280.1280.jpg

A first on the market from APR is their one piece carbon fiber fiber cooling plate that installs in the OEM location over the radiator gap in your engine bay. The plate helps keep air flow around the radiator and not escaping through the gap in the engine bay. The part looks beautiful and installs easily.

Manufacturer description:

The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be.
To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.
Features:

Pre-preg. Carbon Fiber Manufacturing Process
The APR Radiator Cooling Plates are constructed by high temperature and pre-preg. carbon fiber production process, making them durable and able to withstand elevated engine bay temperatures.
Designed for Easy Installation
The APR Radiator Cooling Plates are designed to factory specifications for easy installation and clean fit and finish.
Fade Resistant Epoxy Coating
To ensure durability, the APR Radiator Cooling Plate uses fade resistant epoxy coating to reduce the effects of high engine bay temperatures.

Writeup / Review
as seen on our blog

The beautiful and functional cooling plate from APR for your 86 / FR-S / BRZ is a great addition to your engine bay that is both affordable and easy to install. We recently got one of the first on the market from APR to install on our shop Scion FR-S – check out the pics below!

Retail price on the cooling plate is $152 – get it through Guerilla Racing with free & fast shipping.

APR Carbon Fiber Cooling Plate – Scion FR-S / Subaru BRZ
http://blog.guerillaracing.com/wp-co...ng-plate-3.jpg
http://blog.guerillaracing.com/wp-co...ng-plate-5.jpg

Adding this new cooling plate to our FR-S was a total breeze. The kit includes cutouts for all of the stock nuts / bolts and hood latch, making for a truly plug and play installation taking under 20 minutes (or 30 minutes if you’re like me and clean everything under the hood while you’re at it).

The carbon fiber one piece cooling plate is extremely light and has a high quality polish and shine to it, making it one of the first items noticed when opening the hood. It has an OEM fit and finish — very typical for APR products!

http://blog.guerillaracing.com/wp-co...ng-plate-4.jpg
http://blog.guerillaracing.com/wp-co...ng-plate-2.jpg

The cooling plate is not just an aesthetically pleasing item – it closes the gap in your engine bay to make sure cooler air doesn’t escape from your radiator section. This gap makes the radiator not as effective as it can be while adding a race inspired & high tech look to your engine bay.

http://blog.guerillaracing.com/wp-co...ling-plate.jpg

Tips for installation (installed on our Scion FR-S, but Subaru BRZ / Toyota 86 is same install) :

Line up APR cooling plate to location at front of engine bay for installation.
Remove nuts from top assembly using 10mm and 12mm socket wrenches and set in secure location. Also remove the hood prop holder plastic piece.
Remove 10mm nuts and two pop-out plastic screws from the weather rubber strip section connected along the front bumper and remove the plate, set aside.
Place APR cooling plate in place for stock nuts to be threaded on to stock location. Install and tighten all bolts / nuts for a secure fitment of the plate to your car – make sure not to over-tighten as you could crack the carbon piece.
Install hood prop holder piece through rectangle provision on the cooling plate and through to original location for a secure fitment.
Re-install weather rubber strip with original nuts / bolts / screws.