![]() |
Midnight23 White on White Greddy Turbo Kit 275whp ***Evasive Tuned***
Finished our good friend and customer Jonathan aka @midnight23 clean BRZ. Just wanted to share this build for you guys to enjoy. The car made 275whp / 207tq on our Mustang dyno which is very impressive with a bolt on kit . The car is one of the higher numbers we hit on pump 91. :thumbup:
91 Pump Gas 275WHP (MUSTANG DYNO) 201TQ Current mod list: Exterior: APR Front Splitter JDM Side Markers Rally Armor Mudflaps VG Shark Fin Circuit Motorsports Carbon Fiber Hood Dampers Driveway Labs Rear Diffuser Type 1 Interior: Lathe Werks weighted shift knob GReddy Multi D/A Boost Gauge GReddy Profec Electronic Boost Controller OEM Armrest OEM Audio 400+ System Performance: GReddy Tuner Turbo Kit GReddy Magnetic Oil Drain Plug Invidia Q300 Ti Tips Invidia Q300 resonated front pipe Action Clutch Prototype ECUTEK Tuned by Evasive Motorsports Evasive Spec Fuel System Perrin overpipe APR Radiator Cooling Plate Full Blown Radiator Full Blown Oil Cooler Full Blown Radiator Shroud with 12" Spal Fans Full Blown Radiator Hoses Suspension: Tein Flex coilovers Cusco Lower Control Arms Grimmspeed front strut bar Evasive Spec Alignment and Corner Balance Wheels/Tires: Advan RG-D 18x9.5 +40 custom powder coated pearl white Advan Racing center caps Michellin Pilot Super Sports 255/35/18 Evasive Super Lap Lug Nuts http://img.photobucket.com/albums/v6...ps1be9c35c.jpg http://img.photobucket.com/albums/v6...ps2aefef73.jpg http://img.photobucket.com/albums/v6...ps7c8f5d70.jpg http://img.photobucket.com/albums/v6...psfe5e6311.jpg http://img.photobucket.com/albums/v6...ps65e6ff48.jpg UPDATE 3/17/14 New Wheels Advan RG-D - 18x9.5 / +40 / 5x100 (White) http://img.photobucket.com/albums/v6...ps512c9493.jpg http://img.photobucket.com/albums/v6...psc358ceb1.jpg http://img.photobucket.com/albums/v6...ps50501941.jpg |
Can you post a mod list supporting the kit? Also what sort of ems?
Been thinking about something like this and those numbers are very good. |
Quote:
|
Is that number at 7psi?
|
so clean!
|
Quote:
I expected what you posted for a mod list thus far. I was wondering mainly if a high flow pump and some decent injectors would get it, which I assume would. Just would like to know what you went with to achieve these numbers aside from awesome tuning skills! :thumbsup: |
Lovely set up! Thanks for the work.
Can you pm me how much it cost for this type of set up ? I'm making a side funding for a FI kit. Thanks. Sent from my SCH-I605 using Tapatalk |
Sorry guys I didn't notice Evasive made a thread on this section as well I'll answer all your questions
Quote:
Quote:
Quote:
|
Quote:
Nice. Which pump did you select? Any plans for E85? I think OK gas quality is similar to CA's but we have E85 in the OKC metro so I was thinking of adding a flex fuel setup to mine. You got a nice ride! |
Quote:
|
damn these are the perfect numbers i want to see honestly on CA roads you don't need and can't use 300 hp honestly
|
Quote:
Your setup is something like what my build is going to look like. Just don't wanna reinvent the wheel if someone (you) has already been there and done that. If mine turns out similar to yours I will be very happy. :thanks: |
Quote:
|
Quote:
The snooping I've done should turn out well. Not sure if I should go with 1000s either. I know me and after I get some boost I will buy a case and start the upgrades. Thanks for sharing your build! :thumbsup: |
| All times are GMT -4. The time now is 08:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.