Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Suspension | Chassis | Brakes -- Sponsored by 949 Racing (https://www.ft86club.com/forums/forumdisplay.php?f=59)
-   -   Front Camber Bolts option (https://www.ft86club.com/forums/showthread.php?t=50903)

hanabie 11-07-2013 05:23 PM
Front Camber Bolts option
 
Does anyone know the part number for OEM camber bolts?

What's the maximum setting? What other good options beside OEM camber bolts?

Thank you much

Fizz 11-07-2013 09:59 PM
OEM upper camber bolt: SU003-02805

Another option is Whiteline upper camber bolt: KCA416 (or SPC 81280)

I believe both would give you approx -1.3 or thereabouts?

solidONE 11-08-2013 12:18 AM
SPC 81280 and/or 81260. I run both.

hanabie 11-08-2013 02:27 AM
two bolts per side or just one bolt? thanks

solidONE 11-08-2013 05:07 PM
Quote:
Originally Posted by hanabie (Post 1319640)
two bolts per side or just one bolt? thanks
Both sets. 2 on each side. 4 bolts replaced total.

hanabie 11-08-2013 10:27 PM
Quote:
Originally Posted by solidONE (Post 1320805)
Both sets. 2 on each side. 4 bolts replaced total.
Why running both? I thought lower hole gives more neg camber per manual statement. Are you looking for more camber? How many neg camber can u get? Thanks. Spc bolts apparently are significantly cheaper than whiteline.

Sent from my SGH-T999 using Tapatalk

solidONE 11-08-2013 11:42 PM
Quote:
Originally Posted by hanabie (Post 1321289)
Why running both? I thought lower hole gives more neg camber per manual statement. Are you looking for more camber? How many neg camber can u get? Thanks. Spc bolts apparently are significantly cheaper than whiteline.

Sent from my SGH-T999 using Tapatalk
Whiteline bolts are reboxed SPC bolts. They will have SPC logo cast into the bolt heads. Yes I was looking for as close to -3* of camber as I could without camber plates. I got -2.6* with the bolts. Although if you had to pick one to use the upper 16mm bolts would be a safer bet as they are a thicker diameter thus stronger. Also, my 81280 SPC bolts were zinc coated as well. Some that got the whiteline bolts did not have zinc plating and reported corrosion.

hanabie 11-09-2013 11:27 PM
I got the silver ones from amazon. Looks like those are the new ones.

Sent from my SGH-T999 using Tapatalk

whataboutbob 11-10-2013 01:28 AM
Whiteline ones gave me -1 3/8.


All times are GMT -4. The time now is 07:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.