What Bore do we need on wheels?
 

Couldn't find an answer here for the stock Bore.

I'm looking at these spacers:
http://www.evasivemotorsports.com/mm5/merchant.mvc?

I noticed
H&R DRM Wheel Spacers - 25mm / 12x1.25mm / 5x100 / Bore: 56mm
H&R DRM Wheel Spacers - 25mm / 12x1.5mm / 5x100 / Bore: 54.1mm
H&R DRM Wheel Spacers - 25mm / 12x1.5mm / 5x100 / Bore: 57.1mm

I know the 5x100 is the stock bolt patter but what about that "Bore" specification at the end?
I'm assuming thats the bore of the bolt holes. Anyone know which is the right stock fit?

You need this one.
H&R DRM Wheel Spacers - 25mm / 12x1.25mm / 5x100 / Bore: 56mm.

Check out my spacers. Just like the H&R spacers.
http://www.b2autodesigns.com/index.php?cPath=1129_1216

Excellent packages, though I want 30mm for the back unfortunately.

If you had a pair of 20mm for front and 30mm for the back i'd buy them at your prices no problem.

The hub as a 56.1 mm OD