Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   PlastiDip stock wheels (https://www.ft86club.com/forums/showthread.php?t=48097)

SillySaxon 10-01-2013 04:58 PM

PlastiDip stock wheels
 
Anyone done this yet?
How many cans did you take?
Also, did you use any enhancers?

I'm thinking about plasti dipping my stock wheels but I don't want to mess them up. No one seen any bleeding or scraped them when removing plasti dip?

boredom.is.me 10-01-2013 05:01 PM

Everyone and their mother have plasti dipped their stock FR-S/BRZ wheels. (That's why I didn't bother.) The wheel directory has a few.

Expect a can for each wheel. The triplets have really low covering area, so it shouldn't even take that much. It wouldn't hurt to have an extra can though.

SillySaxon 10-01-2013 05:15 PM

Cool thanks. I'm not planning on doing the whole surface so I"ll need some good tape.
WOuld it take a whole can of enhancer per wheel too? like glos or the metalizer?

TONYpepperon1 10-01-2013 05:19 PM

1 Attachment(s)
Quote:

Originally Posted by boredom.is.me (Post 1244498)
Everyone and their mother have plasti dipped their stock FR-S/BRZ wheels. (That's why I didn't bother.) The wheel directory has a few.

Expect a can for each wheel. The triplets have really low covering area, so it shouldn't even take that much. It wouldn't hurt to have an extra can though.

Not true. Used 2 cans for all 4 wheels and had some left over. 4 coats each and ur done.

DAMotorsports 10-01-2013 05:23 PM

use 3X5 cards around the edge, some tape on the valve steam and your good to go

boredom.is.me 10-01-2013 07:04 PM

Quote:

Originally Posted by TONYpepperon1 (Post 1244539)
Not true. Used 2 cans for all 4 wheels and had some left over. 4 coats each and ur done.

Hence the, "it shouldn't even take that much". Only 2 cans is pretty good though.

JerryMichaels7 10-01-2013 07:37 PM

going black won't take much but any other color might...it took me a can 1/2 for red to cover

ericmpena 10-01-2013 08:39 PM

I did my wheels but it started to peel in a week so I took it all off. I might try it again as I have more cans leftover.

6speed_Sam 10-01-2013 09:17 PM

I did 3-4 coats with very good surface prep...It will scratch real easy and peal. The other day I just painted them black with matte clear(duplicolor). Lays out smoother and should last A LOT longer.

SillySaxon 10-02-2013 10:03 AM

Thanks for the tips guys. I think this plus some spacers will be aesthetics mod #1.

Any tips on keeping them from peeling? Is it ok to just give it a light spray over any peeling spots?

FRSfan111 10-02-2013 12:04 PM

http://i999.photobucket.com/albums/a...11/null-40.jpg
Mine have been fine for 6 months including summer, winter and about 10 hours of track time so far.
Thy key is coats. I left 20-30 min between coats. My first 2 coats were both about 50% transparent then my last 3 coats covered everything. Be smooth and even. You don't want runs!

The Racers Line 10-02-2013 01:59 PM

Did mine anthracite to be a little different. Only took 2.5 cans and then I used the clear plasti dip over it.

http://i208.photobucket.com/albums/b...ps59cc234a.jpg


All times are GMT -4. The time now is 06:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.