FS: JDM rear foglight kit
 

I will be making rear jdm fog light harness' for the FR-S/BRZ. All using OEM parts. Only thing is the reverse lamp housing needs to be drilled for the rear fog light. @GT86drifter can vouch for the parts he has seen and purchased one of these. I can install all of this as well for a small fee. The kit price is $55 shipped. pm me if interested.
parts included in the kit:
-Rear lamp housing harness WITH bulb
-Wiring to the front of the vehicle for install. This has a clip that plugs into the rear harness.

http://imageshack.us/a/img62/5951/ec3a.jpg
http://imageshack.us/a/img842/3548/48qy.jpg
Super clean install.
http://imageshack.us/a/img547/3783/5txu.jpg

Does it include a relay and pins for the main body ECU? Also, will it connect to an EDM stalk?

No relay or pins. Depends on how it is wired up. Mine is fused to a separate switch up front. You could still wire it to the EDM stalk but you would need to extend the wire and get a pin that would fit the stock wiring to the stalk. The pins I have are too big.

I'll get the write up for this to a EDM/JDM stalk once i get it together.

So, does it light up when braking or does it just light up when you turn on the headlights?

Thanks.
That solely depends on how you wire it. I have it wired to the tail lamps. It only lights up once the tail lamps light up. Does not light up with brakes, it is already very bright. Mine is also to a switch so I can turn it off need be.

You can wire it so it's only comes on with the front fogs too
http://www.ft86club.com/forums/showthread.php?t=37507

Yes.

Cool, thanks! I have the wiring figured out for use with a JDM/EDM stalk, just unable to do it due to deployment. The only thing I haven't nailed down is the ECU/stalk pins.

I'm interested. Definitely want to check it out at the meet tomorrow.

bring a set next wednesday. I'm doin it

^+1

Bring one for me too.

I will bring them only thing is that I'm not going to be there this Wed. 9/25 going to MD. The following Wed. 10/2 I will bring with me 2 wiring kits for you guys. Anyone else?

i'll take one. how much for you to install it too?